Futaba 6K V2 8動雙向傳輸 遙控器組 T6K+R3006SB (支援S-FHSS
T-FHSS)
T6K :
CCAB15LP2990T2
R3006SB :
CCAB15LP3890T0
6K V2版的 新增功能
Two additional
channels
- Channels 7/8 are used through
the R3006SB receiver’s S.Bus/S.Bus2 ports
- Allow for expansions or adding
accessories
- Can be assigned to any of the
four switches or VR dial
- Are included in Sub Trims, End
Points, Reverse, Failsafe, Servo Monitor and Trainer
Expanded Flight Modes
(Fly Mod) in multicopter programming
- Priority — toggle through five
different values assigned to flight modes on an assigned
channel
- Matrix — up to nine combinations
using two, 3-position switches for controlling gimbals
Vibration alerts with
timer functions and Throttle Integrate
SBS-01C current sensor
and SBS-01V voltage sensor compatible
NCC 型式認證碼
many functions as the 6K at a comparable price. Telemetry sensors keep you
up-to-date on critical flight data, and S.Bus servos can be programmed through
the transmitter. Controls are positioned to be within easy reach, and the menu
is a breeze to navigate!
6-channel,Transmitting frequency: 2.4GHz band,System: T-FHSS Air,
S-FHSS switchable,Power supply: 6V Dry battery (4-AA’s
required),
Receiver R3006SB: (T-FHSS Air-2.4G system, dual antenna
diversity, S.BUS, S.BUS2 system) S.Bus outputs and conventional channel outputs
are provided. Can use S.Bus as the main link/communication to the servos or a
combination of S.Bus and the conventional outputs together., Power
requirement: 4.8V~7.4V battery or regulated output from ESC, Size:
1.7 x 0.98 x 0.35 in. (43.1 x 25.0 x 8.8 mm), Weight: 0.3 oz. (8.5g),
Battery: F/S Voltage
- S-FHSS/T-FHSS selectable
- Telemetry system (T-FHSS) sensors provide pertinent data on
receiver battery voltage, external voltage, temperature, RPM, altitude and
variometer
- S.Bus/S.Bus2 servo setting functions programmable through
the transmitter
- 30 model memory
- Model naming up to 8 characters
- Programmable mixing for airplanes, helicopters, glider and
multi-rotors
- Digital trims with variable step settings
- Switch/VR position change and AUX channel function
change
- Throttle position warning
- Software is updateable through the CIU-2
- 128×64 DOT backlit LCD screen with adjustable display
contrast
- Alarms can be preset to vibration mode
- Conveniently located Earphone/Trainer/S.Bus jacks
- Adjustable stick length and tension
- The R3006SB receiver can use S.Bus as the main
link/communication to the servos or a combination of S.Bus and the
conventional outputs together
Program navigation is easy and intuitive with the jog dial, +/- pads and end pad. | ![]() | The antenna is inside the transmitter case for safety and handling convenience. | ![]() | This variable rate dial can be programmed to perform different functions; a speaker allows for telemetry voice feedback and audio alarms. |
Four assignable switches (three 3-position and one 2-position) offer maximum flexibility. | ![]() | The earplug/trainer/S.Bus ports are all conveniently located. |